Setting up WireGuard® VPNUK on GL.iNET Routers

This guide will walk you through the installation and configuration of WireGuard® VPN on GL.iNet routers using VPNUK. GL.iNet routers come with native WireGuard® support, making setup quick and easy for a fast, secure, and private VPN connection.

WireGuard® configuration download

Please login using the VPN login username and password from the vpn account you would like to configure.
Click Here to download your WireGuard® configuration file, which is compatible with all devices.

1: Access Your GL.iNet Router Admin Panel

1. Connect your computer or mobile device to your GL.iNet router via Wi-Fi or Ethernet.
2. Open a web browser and go to:
   • http://192.168.8.1 (Default GL.iNet Admin Panel)
3. Log in using your router credentials (default username: admin).

2. Download Your VPNUK WireGuard® Configuration File

1. Click here to download the WireGuard® configuration file from our server.
2. Log in with your VPNUK VPN account login username and password.
3. The system will fetch your WireGuard® configuration file from the VPNUK server.
4. Save it to your computer or mobile device.

3. Import the VPNUK WireGuard® Configuration File into Your GL.iNet Router

1. In the GL.iNet Admin Panel, go to VPN > WireGuard® Client.
2. Click Add a New Configuration.
3. Select Import Configuration File.
4. Upload the vpnuk wireguard configuration file you downloaded earlier.
5. Click Apply to save the settings.

4. Connect to VPNUK via WireGuard®

1. In the WireGuard® Client section, find your VPNUK WireGuard® profile
2. Click Connect to connect the VPN.
3. Once connected, WireGuard® will show your Public IP, VPN endpoint, and handshake status.To confirm the connection, check your new IP address by visiting: https://www.ipaddress.com/
   Your IP should now match your unique VPNUK IP.

Enjoy Secure VPN Access with VPNUK & WireGuard® on GL.iNET Routers

Did this guide help? Please provide us with feedback here or share it with others looking for a secure VPN setup on GL.iNET Routers!

Optional Settings

1. Enable Auto-Start for WireGuard® VPN

To automatically connect to VPNUK on router startup:

1. Go to VPN > WireGuard® Client.
2. Select your VPNUK connection.
3. Enable “Auto Start”.
4. Click Save.

Now, your GL.iNet router will automatically connect to VPNUK WireGuard® whenever it starts up.

2. Configure VPN Routing (Optional – Use VPN on Specific Devices Only)

By default, all devices connected to your router use the VPN. You can manually select which devices use the VPN and which bypass it.

1. Go to VPN > VPN Policy.
2. Enable “Policy Based Routing”.
3. Choose one of the following:
   • VPN for all devices – Uses the VPN for everything.
   • VPN for selected devices only – Allows only chosen devices to use the VPN.
   • Bypass VPN for selected devices – Allows only selected devices to bypass the VPN.
4. Click Apply to save your settings.

Troubleshooting Common Issues

Cannot connect to VPNUK servers?

1. Ensure your WireGuard® configuration file is correct and up to date, we would always recommend fetching a new configuration file from our server if you are unable to connect. Click here to download a new configuration file.
2. Try restarting your router and modem (if applies)
   
3. Check if your ISP is blocking VPN connections

VPN is connected, but no internet?

1. Open WireGuard® and go to your tunnel settings.
2. Ensure AllowedIPs = 0.0.0.0/0, ::/0 is set correctly.
3. Try disabling IPv6 in your router settings